The SmallRig Super Clamp is a compact mounting base for creators who want to position a camera or accessory on a suitable support beyond a traditional tripod.
This SmallRig Super Clamp review focuses on its adjustable jaw, threaded attachment points, and the fit checks that matter before mounting.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A practical choice for creators who need to attach a compatible camera accessory to a narrow bar, shelf, or other support surface.
- The adjustable jaw spans a minimum opening of 15 mm and a maximum of about 40 mm, so check the thickness of the intended support before buying.
- The clamp has 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Rubber pads at the clamp contact points are intended to help resist slipping and protect surfaces from scratches.
- Its construction combines aluminum alloy and stainless steel.
Pros
- A useful jaw range for attaching the clamp to many narrow supports.
- 1/4-inch and 3/8-inch threaded options support a variety of compatible accessories.
Consider before buying
- The jaw range rules out supports thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum recommendation calls for care when planning a camera and accessory setup, especially if it places leverage on the clamp.
Read the full review summary
This clamp’s appeal is its simple combination of a jaw that opens from 15 mm to about 40 mm and 1/4-inch and 3/8-inch threaded holes.
That gives you a way to attach it to a range of suitably sized surfaces, then connect compatible accessories without needing a dedicated clamp for every setup.
It is best suited to a modest camera rig or accessory arrangement where the support surface is within the jaw range and the attachment points match your hardware.
The product data gives a maximum weight recommendation of 3.3 pounds; treat that as a ceiling for planning, and consider how the shape and stability of the actual mounting surface affect your setup.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The adjustable jaw and two common threaded sizes suit a variety of mounting arrangements.
Jaw range
The 15–40 mm range covers many narrow supports, though larger surfaces fall outside it.
Accessory compatibility
Both 1/4-inch and 3/8-inch threaded holes provide options for compatible hardware.
Grip protection
Rubber pads are designed to reduce slipping and scratching at the clamp contact points.
Load guidance
The stated maximum recommendation is useful, but buyers still need to assess their complete setup and support surface.
Portability
At 0.13 kg and described as compact, it is suited to a lightweight kit.
Key Features and Specifications of SmallRig Super Clamp
- The adjustable jaw spans a minimum opening of 15 mm and a maximum of about 40 mm, so check the thickness of the intended support before buying.
- The clamp has 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Rubber pads at the clamp contact points are intended to help resist slipping and protect surfaces from scratches.
- Its construction combines aluminum alloy and stainless steel.
- The listed maximum weight recommendation is 3.3 pounds; use it as a limit to respect rather than an assurance for every mounting arrangement.
- The package includes one super clamp. The product is listed at 0.13 kg and described as compact.
Pros and Cons of SmallRig Super Clamp
Pros
- A useful jaw range for attaching the clamp to many narrow supports.
- 1/4-inch and 3/8-inch threaded options support a variety of compatible accessories.
- Rubber contact pads are designed to protect surfaces and improve grip.
- Lightweight construction makes it easy to include in a camera kit.
Consider before buying
- The jaw range rules out supports thinner than 15 mm or thicker than about 40 mm.
- The 3.3-pound maximum recommendation calls for care when planning a camera and accessory setup, especially if it places leverage on the clamp.
- The clamp is only a mounting base; confirm that you have the compatible accessory or adapter needed to connect your gear.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider this clamp if you need a compact way to mount a camera accessory on a bar, shelf edge, or another support that falls within its jaw range.
Its threaded holes make it useful when your existing hardware has a matching 1/4-inch or 3/8-inch connection.
Before choosing it, measure the mounting surface and check the thread size of the accessory you intend to attach.
Also account for the complete rig’s weight and how far it will extend from the clamp; the listed maximum is 3.3 pounds, but a setup’s leverage and support stability matter to the decision.
Who should skip it
Look elsewhere if the intended support is outside the 15–40 mm jaw range, or if your planned setup exceeds the stated maximum weight recommendation.
This is not a complete articulated arm kit. If you need a built-in arm to reposition a monitor or light, make sure the separate hardware you require is included in the option you choose.
How the SmallRig Super Clamp Fits a Camera Rig
Check the support before you plan the shot
The jaw dimensions are central to whether this clamp will work in a real setup. Measure the surface where you plan to attach it, including any coating or edge profile that affects the fit.
A surface inside the 15–40 mm range is a starting point; also consider whether its shape gives the clamp a stable place to sit.
Match the thread to the accessory
The 1/4-inch and 3/8-inch threaded holes give you two connection sizes, which can make the clamp easier to integrate with compatible camera hardware. Check the accessory’s thread and the intended orientation before relying on a direct connection.
If they do not match, confirm that a suitable adapter is part of your kit.
Think about load and leverage together
The listed maximum recommendation is 3.3 pounds, so compare it with the total equipment that will be supported.
Weight alone does not describe every setup: an extended accessory can put leverage on the clamp, while the support surface and how securely the jaw sits also matter.
Keep a practical margin for the arrangement you plan to use.
Protect the contact surface
Rubber pads are designed to help prevent slipping and scratching where the clamp meets the support.
That is a useful design detail for a bar or finished surface, but it does not remove the need to choose a suitable mounting point and check that the clamp is seated securely before attaching equipment.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the main clamp if you want a compact mounting base and already have compatible hardware.
The kit is a better fit if your support needs a wider jaw range or you want an articulating arm included for positioning an accessory.
- This kit pairs a clamp with a 9.8-inch articulating arm, with 1/4-inch screws at both ends.
- Its clamp opens from 15 mm to 54 mm, and the arm has double 360-degree ball heads.
- The SmallRig Super Clamp provides the clamp and threaded holes, with a jaw opening from 15 mm to about 40 mm.
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
The main clamp suits buyers who want a basic attachment point and can supply their own compatible positioning hardware.
The double ball head mount is more suitable when you want an integrated adjustable connection and an included action camera adapter.
- This mount combines a super clamp with a double ball head and a 1/4-inch-20 screw, and includes an action camera mount adapter.
- Its listed maximum load capacity is 1.5 kg.
- The SmallRig Super Clamp is a clamp with 1/4-inch and 3/8-inch threaded holes, intended to connect with compatible accessories.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering for a compact camera rig when your support fits its 15–40 mm jaw range, your accessory matches one of its threaded connections, and your setup stays within the listed 3.3-pound maximum recommendation.
Its lightweight build and protective pads make it a practical mounting base for compatible gear.
Measure the support, confirm your connection hardware, and think about leverage as well as total weight before buying. If you need an articulating arm or a wider clamp opening, choose a setup that includes those features.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A practical choice for creators who need to attach a compatible camera accessory to a narrow bar, shelf, or other support surface.
- The adjustable jaw spans a minimum opening of 15 mm and a maximum of about 40 mm, so check the thickness of the intended support before buying.
- The clamp has 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Rubber pads at the clamp contact points are intended to help resist slipping and protect surfaces from scratches.
- Its construction combines aluminum alloy and stainless steel.