The SmallRig Field Monitor Mount Holder review centers on a compact camera-rig accessory with broad angle adjustment, a cold shoe base and a thumb-operated tilt control.
It is designed for 5- and 7-inch monitors, with useful attachment options for creators building a cage or handle setup.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig 2905B Field Monitor Mount Holder
A compact, adjustable mount for camera operators who want to position a 5- or 7-inch monitor from a cage or handle cold shoe.
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle cold shoe.
- Provides 180-degree tilt and 360-degree swivel for monitor positioning.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
- Built-in locating pins are designed to help secure Ninja V and V+ monitors; a silicone pad helps protect the monitor and resist twisting.
Pros
- Wide tilt and swivel adjustment accommodates varied monitor viewing angles.
- Hand-adjustable tilt tension makes quick positioning straightforward.
Consider before buying
- Swivel tension requires the included Allen wrench, so it is not adjusted by hand at the mount.
- The stated load capacity changes with tilt angle, so buyers need to check the limit for their intended position.
Read the full review summary
The 2905B combines a cold shoe connection with 180-degree tilt and 360-degree swivel, giving operators room to orient a monitor for different shooting positions.
Its thumb screw adjusts tilt tension, while the supplied Allen wrench is used to set swivel tension and retighten the top 1/4-inch screw.
Its design is aimed at a specific setup: a 5- or 7-inch monitor mounted on a camera cage or handle. The locating pins and silicone pad are intended to help secure compatible monitors and protect their surfaces.
Buyers should match the mounting points and monitor weight to their own rig, since the stated load capacity changes with tilt angle.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
Offers 180-degree tilt and 360-degree swivel, with separate tension adjustment for positioning.
Mounting flexibility
The cold shoe base, bottom 1/4-inch threaded hole and top 1/4-inch screw support several common rig connections.
Monitor fit
Designed for 5- and 7-inch monitors, with locating pins and a silicone pad to help steady and cushion the top connection.
Tension control
Tilt tension adjusts by hand; swivel tension uses the included Allen wrench.
Load guidance
Angle-specific limits are provided, giving buyers useful guidance while requiring attention to monitor position and weight.
Compactness
At 76 g, with a folded size of 78 by 67 by 42 mm, it is a small addition to a camera rig.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle cold shoe.
- Provides 180-degree tilt and 360-degree swivel for monitor positioning.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
- Built-in locating pins are designed to help secure Ninja V and V+ monitors; a silicone pad helps protect the monitor and resist twisting.
- The base has a cold shoe adapter and a 1/4-inch-20 threaded hole; the top has a 1/4-inch-20 screw.
- Maximum load varies by tilt angle: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees and under 5 lb at 30 degrees.
- Weighs 76 g and measures 78 by 67 by 42 mm when folded.
Pros and Cons of SmallRig Monitor Mount
Pros
- Wide tilt and swivel adjustment accommodates varied monitor viewing angles.
- Hand-adjustable tilt tension makes quick positioning straightforward.
- Multiple connection points suit common camera cage and accessory setups.
- Locating pins and a silicone pad add useful contact features for compatible monitors.
Consider before buying
- Swivel tension requires the included Allen wrench, so it is not adjusted by hand at the mount.
- The stated load capacity changes with tilt angle, so buyers need to check the limit for their intended position.
- The top 1/4-inch screw needs to be retightened with the Allen wrench for additional security.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider the 2905B if you use a 5- or 7-inch monitor and want to mount it directly on a camera cage or handle cold shoe.
The tilt and swivel range offers flexibility for adjusting the screen as your camera position or viewing posture changes, and the thumb screw lets you alter tilt tension without reaching for a tool.
It also suits rigs that benefit from an additional 1/4-inch-20 connection at the base or a top screw for a compatible accessory.
Before buying, confirm your monitor and rig use compatible connections, then check the angle-specific capacity against the weight you plan to mount. Tighten the 1/4-inch screw as directed and keep the swivel wrench available for setup changes.
Who should skip it
Look elsewhere if your rig does not have a compatible cold shoe or 1/4-inch-20 connection, or if your monitor weight exceeds the limit for the angle you need.
This is a monitor holder rather than an extended positioning arm. If your setup requires a longer reach between the camera and screen, check that your planned mounting arrangement provides the distance you need.
How the SmallRig Monitor Mount fits a camera rig
Angle control for framing
The 180-degree tilt and 360-degree swivel let the monitor face different directions while remaining attached to the camera rig.
The thumb screw controls tilt tension, while the swivel uses a separate Allen-wrench adjustment, so the setup involves both quick hand adjustment and a tool-based tension setting.
Mounting points and monitor contact
A cold shoe base is suited to a cage or handle with a matching shoe, and the bottom 1/4-inch-20 hole gives another way to connect compatible support hardware.
At the top, the 1/4-inch-20 screw and locating pins provide the monitor interface; the silicone pad is intended to cushion contact and resist twisting. Check the exact interfaces on your monitor and support before assembling the rig.
Capacity depends on position
The different load limits at 90, 45 and 30 degrees mean the useful capacity depends on how the monitor is angled.
A buyer should compare the monitor's weight with the limit for the intended position and follow the guidance to retighten the top screw with the Allen wrench.
This makes the capacity figures relevant to setup, not just a general maximum.
A compact dedicated holder
At 76 g and 78 by 67 by 42 mm folded, the mount adds little bulk to a camera setup.
Its dimensions and monitor-size guidance point toward a compact holder for a nearby screen, so buyers should consider whether that form matches the reach and placement their shooting style requires.
Alternatives to SmallRig Monitor Mount
One alternative is included because it offers a distinct monitor-mount design with a clearly described portrait and landscape installation option.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 6313 Camera Monitor Mount
Compare the 6313 if portrait and landscape monitor installation is a key part of your workflow. The 2905B is a straightforward option when its 5- or 7-inch monitor guidance and angle-specific load limits fit your setup.
- The 6313 also provides 180-degree tilt and 360-degree pan, and its description specifies horizontal and vertical monitor mounting, a retractable 1/4-inch-20 locating screw, thumb-adjustable tilt damping and a cold shoe base.
- The 2905B offers 180-degree tilt, 360-degree swivel, a cold shoe base and a 1/4-inch-20 threaded hole, with capacity limits specified for different tilt angles.
Is SmallRig Monitor Mount Worth It?
The SmallRig 2905B Field Monitor Mount Holder is worth considering for a compact camera rig that needs flexible monitor angles and a cold shoe connection.
Its broad adjustment range, thumb-operated tilt tension and added threaded connection make it a useful fit for compatible 5- or 7-inch screens.
Check your monitor's connection and weight against the capacity for your chosen tilt, and plan to use the included Allen wrench for swivel tension and screw tightening.
If those details suit your rig, this is a focused, compact mounting option.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig 2905B Field Monitor Mount Holder
A compact, adjustable mount for camera operators who want to position a 5- or 7-inch monitor from a cage or handle cold shoe.
- Designed to support 5- and 7-inch camera monitors on a camera cage or handle cold shoe.
- Provides 180-degree tilt and 360-degree swivel for monitor positioning.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
- Built-in locating pins are designed to help secure Ninja V and V+ monitors; a silicone pad helps protect the monitor and resist twisting.