Product Reviews

SmallRig 2066B Adjustable Articulating Magic Arm Review

A flexible short rigging arm for camera builders positioning lightweight monitors, lights, or microphones with 1/4-inch connections.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Adjustable Articulating Magic Arm review centers on a compact 9.8-inch connector for positioning lightweight camera-rig accessories.

Its dual ball heads and 1/4-inch screws suit setups that need flexible placement, provided the attached gear stays within the stated 213-gram maximum recommendation.

SmallRig Magic Arm Review Summary

The quick verdict

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible short rigging arm for camera builders positioning lightweight monitors, lights, or microphones with 1/4-inch connections.

  • 9.8-inch articulating arm, identified as model 2066B.
  • Dual ball-head design, with each head rotating 360 degrees for angle adjustment.
  • 1/4-inch threaded screw connections at both ends.
  • Compatible accessory examples include on-camera flash lights, microphones, LCD or DV monitors, cages, NATO rails, and side handles.

Pros

  • Dual ball heads make it easier to find an angled position than a fixed connector.
  • Standard 1/4-inch connections suit a range of common camera-rig accessories.

Consider before buying

  • The 213-gram maximum recommendation rules it out for many heavier monitors and lights.
  • It has 1/4-inch threads at both ends, so the rig needs compatible mounting points or adapters.
Read the full review summary

The 2066B is a single articulating arm with 1/4-inch threads at both ends, making it a straightforward link between compatible camera-rig parts and an accessory such as a monitor, light, or microphone.

Dual ball heads rotate through 360 degrees, so the arm offers several ways to orient the attached item without requiring a fixed straight connection.

Its strongest fit is a lightweight, carefully planned rig where flexible positioning matters more than carrying capacity. At 9.8 inches, it provides useful reach for a small accessory, but the stated maximum weight recommendation is only 213 grams.

Check the combined accessory and attachment arrangement before choosing it, especially for a monitor or anything that could shift during movement.

The buying factors

SmallRig Magic Arm Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Positioning flexibility

Two 360-degree ball heads allow a broad range of accessory angles.

8/10

Connection compatibility

The 1/4-inch thread on both ends supports many common camera-rig accessories.

7/10

Reach

The 9.8-inch arm offers useful extension, though a longer reach is not specified.

4/10

Load suitability

The 213-gram maximum recommendation limits it to lightweight attachments.

7/10

Accessory protection

An O-ring rubber cushion at the screw is designed to help prevent monitor scratches and tighten the connection.

7/10

Rig simplicity

It supplies the articulating link, but requires compatible mounting points at both ends.

Key Features and Specifications of SmallRig Magic Arm

  • 9.8-inch articulating arm, identified as model 2066B.
  • Dual ball-head design, with each head rotating 360 degrees for angle adjustment.
  • 1/4-inch threaded screw connections at both ends.
  • Compatible accessory examples include on-camera flash lights, microphones, LCD or DV monitors, cages, NATO rails, and side handles.
  • An O-ring rubber cushion at the 1/4-inch screw is intended to help protect a monitor from scratches and improve locking contact.
  • Maximum weight recommendation: 213 grams.
  • Weighs 0.21 kg and is not water resistant.

Pros and Cons of SmallRig Magic Arm

Pros

  • Dual ball heads make it easier to find an angled position than a fixed connector.
  • Standard 1/4-inch connections suit a range of common camera-rig accessories.
  • The 9.8-inch length can add reach between a rig mounting point and a small accessory.
  • The rubber cushion is a useful contact detail for monitor mounting.

Consider before buying

  • The 213-gram maximum recommendation rules it out for many heavier monitors and lights.
  • It has 1/4-inch threads at both ends, so the rig needs compatible mounting points or adapters.
  • The arm itself does not include a clamp or mounting base in the described package.

Who Should Buy SmallRig Magic Arm?

Good fit

Consider the SmallRig 2066B if you need to position a lightweight monitor, light, or microphone away from a camera cage or other 1/4-inch mounting point.

Its dual 360-degree ball heads allow adjustment at both ends, which can help when a straight connection would put the accessory at an awkward angle.

Before buying, check the accessory’s weight and the mounting hardware on both sides. Keep the complete attached load within the 213-gram recommendation, and make sure the threads and available clearance suit your rig.

The rubber cushion can help protect a monitor’s contact area, but it does not change the arm’s load limit.

Who should skip it

Skip this arm if your accessory exceeds the 213-gram recommendation or your setup needs a clamp supplied as part of the mount. Confirm that both connection points use compatible 1/4-inch threads before choosing it.

How the SmallRig Magic Arm Fits a Lightweight Rig

Flexible angles from two ball heads

The dual 360-degree ball-head layout is the main reason to choose this arm.

It can orient an accessory at different angles relative to its mounting points, a practical arrangement for a small monitor or light when a rigid straight connector would not place it where the operator needs it.

Reach comes with a load limit

At 9.8 inches, the arm provides more extension than a compact connector, but the documented maximum recommendation is 213 grams.

Treat that figure as a firm selection constraint: weigh the intended accessory and check how its position affects the overall rig before relying on this arm to hold it.

Plan both ends of the connection

Both ends use 1/4-inch threads, so the arm links compatible accessories and rig parts rather than clamping directly onto a surface.

The described compatibility examples include cages, NATO rails, and side handles; verify the exact mounting point and any needed adapter in your own setup.

A small contact-protection detail

An O-ring rubber cushion sits with the 1/4-inch screw. The design is intended to reduce scratching on a monitor and help the connection lock more tightly, which is useful where the screw meets a finished accessory.

It does not replace checking that the connection is secure before use.

Alternatives to SmallRig Magic Arm

Camera Mounts & Clamps alternative

SmallRig 5.5-Inch Adjustable Friction Articulating Magic Arm
4.7/5

1,000+ ratings

Read Amazon Reviews

SmallRig 5.5-Inch Adjustable Friction Articulating Magic Arm

Choose the 5.5-inch model if a shorter arm better suits your rig and its stated load guidance matches your accessory. The 2066B offers greater length, while its 213-gram recommendation makes it the more limited choice for heavier gear.

  • This 5.5-inch arm also has dual 360-degree ball heads and 1/4-inch screws at both ends; its description gives a best load of 1.5 kg.
  • The 2066B is 9.8 inches long, uses dual 360-degree ball heads, and has a 213-gram maximum weight recommendation.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

Choose the kit if you need a clamp to attach the arm to a rod or other suitable surface and want the extra threaded options.

The 2066B is a simpler fit when your rig already has compatible 1/4-inch mounting points and you only need the arm.

  • This kit pairs a 9.8-inch articulating arm with a super clamp that opens from 15 to 54 mm and includes 1/4-inch and 3/8-inch threads.
  • The 2066B is a 9.8-inch arm with 1/4-inch threads at both ends and no clamp included in its described package.

Is SmallRig Magic Arm Worth It?

The SmallRig 2066B is worth considering for a lightweight camera-rig accessory that needs flexible positioning and a 1/4-inch connection at each end.

Its dual ball heads and 9.8-inch length give it practical placement options, and the rubber cushion is a useful monitor-contact feature.

The deciding factor is its 213-gram maximum weight recommendation.

Check the accessory load and both mounting points before purchase; if the gear is heavier or you need an included clamp, choose a setup whose documented design matches those needs.

Your review at a glance

SmallRig 2066B Adjustable Articulating Magic Arm
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible short rigging arm for camera builders positioning lightweight monitors, lights, or microphones with 1/4-inch connections.

  • 9.8-inch articulating arm, identified as model 2066B.
  • Dual ball-head design, with each head rotating 360 degrees for angle adjustment.
  • 1/4-inch threaded screw connections at both ends.
  • Compatible accessory examples include on-camera flash lights, microphones, LCD or DV monitors, cages, NATO rails, and side handles.

Written by

marfacontemporary.org Editorial Team

Editorial team

marfacontemporary.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2066B Adjustable Articulating Magic Arm

SmallRig 2066B Adjustable Articulating Magic Arm

A flexible short rigging arm for camera builders positioning lightweight monitors, lights, or microphones with 1/4-inch connections.

  • 9.8-inch articulating arm, identified as model 2066B.
  • Dual ball-head design, with each head rotating 360 degrees for angle adjustment.
Check Video Reviews on Amazon